Jun. 05, 2014 | Posted in Senza categoria , Student Reporter | Tags:S.K., Jewelry MakingReporter: | Course: Jewelry Making

Ring with galleria

1. This month I continued working with the ring with galleria that I started last month.

2. I made an aggiornatura on the backside to give more light to the stones.

3. I fused a silverplate, passed it in the rolling mill to make it the right thickness and annealed it to make it softer to bend.

4. Then I bended it to fit to the top part of the ring.

5. I passed the two parts with emery paper to make the seam to fit better for soldering.

6. The parts tied together with iron wire for soldering.

7. After soldering I saw out a piece from both sides to give the ring a nice shape that gets narrow when going down.

8. I soldered the inner rings inside on both sides.

9. Then I started to solder the bars in between. First I soldered the central ones. At this point I let them be longer than what needed.

10. And then I soldered the bars on the sides.

11. Here all the 8 bars are soldered.